Figure 20-3 Menu 24.1.1 - System Maintenance - System Status; Table 20-1 System Maintenance - Status Menu Fields - ZyXEL Communications VES-1000 Series User Manual

VES-1000 Series Ethernet Switch
20.2.1 System Maintenance
Enter 24 from the main menu to go to Menu 24 – System Maintenance.
1.
Enter 1 to open Menu 24.1 – System Status.
2.
Enter 1 again to open Menu 24.1.1 — System Maintenance — System Status.
3.
Port Link
> 1 9M/12M
2 18M/16M
3 Down
4 18M/16M
5 Down
6 Down
7 18M/16M
8 18M/16M
9 18M/16M
10 18M/16M
11 12M/16M
12 18M/16M
13 100M/F
14 100M/F
COMMANDS:
Figure 20-3 Menu 24.1.1 – System Maintenance – System Status
Figure 20-3 shows the menu screen for the VES-1012 Ethernet switch. The same screen for the VES-1008A will
show Ports 1-10.
The following table describes the fields present in Menu 24.1 – System Maintenance – Status.
FIELD
Port This refers to the VDSL or Ethernet port number. The cursor (">") next to a port marks the
current selected port (see commands ahead).
Link This field shows whether the VDSL or Ethernet connection is down, the upstream/downstream
speeds of the VDSL connections and the speed/duplex mode of the Ethernet connections.
If the configured upstream and downstream rates for port 1 were 18Mbps and 16Mbps
respectively (configured in SMT menu 6.1), then we can see from menu 24.1.1 that the actual
(upstream and downstream) rates attained for port 1 with rate adaption enabled were 9Mbps
and 12Mbps respectively. Without rate adaption this link may not have established at all or it
would have established but with sporadic transmission.
State This field shows training state of the ports. The states are FWD (forwarding), which means the
link is functioning normally or STOP (the port is stopped to break a loop or duplicate path).
TxPkts This field shows the number of transmitted packets on this port.
RxPkts This field shows the number of received packets on this port.
Errs This field shows the number of received errors on this port.
20-2
Menu 24.1.1 — System Maintenance — System Status
State TxPkts
FWD 1636800
FWD 3023504
STOP 0
FWD 3093495
STOP 0
STOP 0
FWD 3036539
FWD 3041121
FWD 3017116
FWD 109882
FWD 3029325
FWD 607588
FWD 1051300
FWD 246459
Press Command:
a-Reset All b-Reset
Table 20-1 System Maintenance – Status Menu Fields
RxPkts Errs Tx(KB/s)
636352 4 473
0 0 8
0 0 0
55529 0 8
0 0 0
0 0 0
26460 0 8
16886 0 8
0 0 8
0 0 8
11669 0 6
30 0 6
10710950 1 11
9990813 0 0
d-Drop i-UP j-Down
DESCRIPTION
Rx(KB/s)
10
0
0
0
0
0
0
0
0
0
0
0
508
10
p-Detail ESC-Exit
System Maintenance 1
Up Time
7:46:10
22:24:04
0:00:00
22:24:04
0:00:00
0:00:00
22:23:51
22:24:00
22:24:03
0:55:56
22:24:02
5:20:06
72:07:19
72:07:19