This chapter discusses the System Status, System Information and Console Port Speed, Log and
20.1 Introduction
Select 24 in the main menu to open Menu 24 – System Maintenance, as shown next.
20.2 System Status
System status is a tool that can be used to monitor your VES. System maintenance gives you information on your
system firmware version and the status/statistics of the ports. Similarly, Spanning Tree Protocol Status and VLAN
Status display STP and VLAN information
System Maintenance 1
Menu 24 - System Maintenance
1.
System Status
2.
System Information and Console Port Speed
3.
Log and Trace
4.
Diagnostic
5.
Backup Configuration
6.
Restore Configuration
7.
Upload Firmware
8.
Command Interpreter Mode
10. Time and Date Setting
11. Remote Management Setup
12. Hardware Monitor
14. Return to Default Setting
Enter Menu Selection Number:
Figure 20-1 Menu 24 – System Maintenance
Menu 24.1 - System Status
1. System Maintenance
2. Spanning Tree Protocol Status
3. VLAN Status
Press ENTER to Confirm or ESC to Cancel:
Figure 20-2 Menu 24.1 – System Status
VES-1000 Series Ethernet Switch
System Maintenance 1
Trace and Diagnostic SMT menus.
Chapter 20
20-1