Figure 11-2 Secured Client Setup; Table 11-2 Secured Client Setup - ZyXEL Communications VES-1000 Series User Manual

VES-1000 Series Ethernet Switch
11.2.1 Secured Client Screen
Click Maintenance in the navigation panel and then Secured Client in the Maintenance screen to open the
Secured Client Setup screen.
The Secured Client Setup screen summarizes which IP addresses administrators can use to manage the line card.
The following table describes the labels in this screen.
LABEL
Maintenance Click Maintenance to return to the main maintenance screen.
Index This is the client set index number.
Active Yes indicates the client set is active and No indicates that it is not active.
Start Address The default value for a start and end address is 0.0.0.0, which means you don't care which
host is trying to use a service (Telnet, FTP, Web, ICMP).
End Address This field displays the end IP address in a range of client IP addresses that may use the
service(s) defined in the next field.
Telnet Yes means that the specified service is enabled for this client set.
FTP
Web
ICMP
11.2.2 Edit Secured Client Screen
Click Maintenance in the navigation panel and then Secured Client in the Maintenance screen.
Click an index number in the Secured Client Setup screen to open the Edit Secured Client screen.
Use the Edit Secured Client screen to configure the IP addresses that an administrator can use to manage this line
card.
11-4

Figure 11-2 Secured Client Setup

Table 11-2 Secured Client Setup

DESCRIPTION
Maintenance