Table 12-2 Show Stp Status - ZyXEL Communications VES-1000 Series User Manual

The following table describes the labels in this screen.
LABEL
Spanning Tree This field shows if the switch is enabled to participate in an STP-compliant network.
Protocol
Bridge The following six fields relate to the root bridge.
Bridge ID This is a unique identifier for this bridge, consisting of bridge priority plus MAC address.
Hello Time This is the time interval (in seconds) at which the root device transmits a configuration
(second) message.
Max Age (second) This is the maximum time (in seconds) a device can wait without receiving a configuration
message before attempting to reconfigure.
Forwarding Delay This is the time (in seconds) a device will wait before changing states
(second)
Cost to Bridge This is the cost for a packet to travel to the root in the current Spanning Tree configuration.
The slower the media, the higher the cost. This is 0 if your bridge is the root device
Port ID This is the index of the port on this switch that is closest to the root. This switch
communicates with the root device through this port. This is 0X0000 if your bridge is the
root device.
Topology Changed This is the number of times the spanning tree has been reconfigured.
Times
Time Since Last This is the time since the spanning tree was last reconfigured.
Change
Poll Interval(s) The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking Set Interval.
Set Interval You may change the refresh interval by typing a new number in the text box and then
clicking Set Interval.
Stop Click Stop to halt system statistic polling.
12.2.2 Hardware Monitor Screen
Click Statistics in the navigation panel and then the Hardware Monitor button to open this screen.
Statistics

Table 12-2 Show STP Status

DESCRIPTION
VES-1000 Series Ethernet Switch
12-3