Straight Stitching; Starting To Sew; Changing Sewing Direction; Finishing Sewing - Janome Decor Excel II 5024 Instruction Manual

Janome 5024 Instruction Manual
www.aaasewing.com
0 1 2 3 4 5 6
0 1 2 3 4
4
3
5

Straight Stitching

Stitch selector:
Stitch width:
Stitch length:
Top thread tension:
Presser foot:
¥ Starting to Sew
Raise the presser foot and position the fabric next to
a seam guide line on the needle plate (see page 18).
Lower the needle to the point where you want to
start.
Lower the presser foot and pull the threads toward
the back. Depress the foot control.
Gently guide the fabric along the seam guide line
letting the fabric feed naturally.
¥ Changing Sewing Direction
Stop the machine and bring the needle down into the
fabric by pressing the up/down needle position but-
ton. Raise the presser foot.
Pivot the fabric around the needle to change sewing
direction as desired. Lower the presser foot.
Presser foot lifter
¥ Finishing Sewing
To fasten the ends of seams, press the reverse
button and sew several reverse stitches.
Raise the presser foot. Remove the fabric, draw the
threads to the back and cut using the thread cutter.
The threads are cut the proper length for starting the
next seam.
Thread cutter
Fabric
1
1.5Ð4
2Ð6
A: Zigzag foot
5024 Owners Manual/ User Guide
17