Threading The Machine - Janome Decor Excel II 5024 Instruction Manual

Janome 5024 Instruction Manual
www.aaasewing.com
12

Threading the Machine

* Raise the presser foot lifter.
* Press the up/down needle position button
twice to raise the needle.
Presser foot lifter
Lead the thread from the spool and pass it
through the thread guide. Then draw it down
along the right slot.
Thread guide
Then, down around the check spring holder.
Check spring holder
Firmly draw the thread from right to left over
the take-up lever and down into the take-up
lever eye.
Thread take-up lever
Slide the thread behind the needle bar
thread guide on the left.
Thread the needle from front to back or use
the needle threader.
Needle bar thread guide
5024 Owners Manual/ User Guide