Inserting The Bobbin - Janome Decor Excel II 5024 Instruction Manual

Janome 5024 Instruction Manual
www.aaasewing.com
¥ Inserting the Bobbin
Place the bobbin in the holder with the
thread running off counterclockwise.
Guide the thread into the notch
front side of the bobbin holder.
Draw the thread to the left, sliding it between
the tension spring blades.
Continue to draw the thread lightly until the
thread slips into notch
Pull out about 15 cm (6Ó) of thread.
Attach the hook cover plate.
Check the threading by referring to the chart
1/8 3/8 5/8
shown on the hook cover plate.
10
End of thread
Notch
Notch
Threading chart
5024 Owners Manual/ User Guide
on the
.
11