Blind Stitch Hemming - Janome Decor Excel II 5024 Instruction Manual

Janome 5024 Instruction Manual
www.aaasewing.com
30
0 1 2 3 4 5 6
0 1 2 3 4
2
1
3

Blind Stitch Hemming

Stitch selector:
Stitch width:
Stitch length:
Top thread tension:
Presser foot:
How to fold the fabric.
Wrong side of fabric
0.4Ð0.7 cm (5/32ýÐ1/4ý)
Sewing technique and guide setting.
* When the needle comes to the left hand
side, position the fabric so that the folded
edge comes to the left side of the guide.
Lower the presser foot.
* Adjust the position of the needle sewing
with the stitch width key so that the needle
just pierces the folded edge of the fabric
when the needle comes to the left side.
Sew guiding the folded edge along the
guide.
Wrong side of fabric
When the needle comes to right side
When the needle comes to left side
Guide
Guide dial
Folded edge
Needle
Open the fabric after sewing.
Right side of fabric
Note:
For a professional looking hem, try not to let the
needle pierce more than 1/8ý (0.2 cm) into the fold.
If the folded edge is pierced too far to left side, you
can not expect a good seam on the right side of the
fabric.
4
2Ð3
1Ð3
2Ð6
G: Blind stitch hem foot
5024 Owners Manual/ User Guide