Pattern Selector Dial; Zigzag Width Control; Stitch Length Control; Infinite Needle Position - Janome Decor Excel II 5024 Instruction Manual

Janome 5024 Instruction Manual
0 1 2 3 4 5 6 7 8 9 0 1
A
R A A
BH 1 2 3
0 1
www.aaasewing.com
16
2 3 4 5 6 0 1 2
0 1 2 3 4 5 6
0 1 2 3
2 3 4 5 6

Pattern Selector Dial

Raise the needle and turn the pattern selector dial
until the red indication is below the desired stitch.
At the same time the appropriate thread tension,
3 4
zigzag width and stitch length are indicated in the
upper portion of the guide message window.
Pattern selector dial
Red indicator mark
Thread tension dial
Zigzag width
Stitch length
Recommended presser foot
* Concerning items
there sometimes is a discrepancy between
the settings shown on the front panel and
those shown on the reference chart inside
the top cover.
The reference chart settings are
recommended for the special sewing
techniques illustrated on the chart.

Zigzag Width Control

The higher the number, the wider the stitch width.
This machine will sew the maximum 6.5 mm (0.25Ó)
wide zigzag.
* Raise the needle above the fabric when
you set the stitch width.

Stitch Length Control

The higher the number, the longer the stitch length.
4
You can select the suitable stitch length for fabrics
that you plan to sew.
Note:
Stitch length is automatically set for stretch stitch
patterns on pattern number 2.16 to 24.

Infinite Needle Position

When pattern number 1 is selected and the stitch
width control is activated, you can move the needle
between center and left needle positions.
through above,
5024 Owners Manual/ User Guide