Zipper Sewing; To Snap On The Zipper Foot; Fabric Preparation; To Sew - Janome Decor Excel II 5024 Instruction Manual

Janome 5024 Instruction Manual
www.aaasewing.com
0 1 2 3 4 5 6
0 1 2 3 4
4
3
5

Zipper Sewing

Stitch selector:
Stitch width:
Stitch length:
Top thread tension:
Presser foot:
¥To Snap On the Zipper Foot
Fit the pin on the zipper foot into the groove on the
foot holder.
* To sew the left side of the zipper, attach the
zipper foot on the right-hand side.
* To sew the right side of the zipper, attach the
zipper foot on the left-hand side.
Groove
Pin
When the left side is sewn.
When the right side is sewn.
¥Fabric Preparation
Add 1 cm (3/8Ó) to the zipper size. This is the overall
opening size.
Right side of fabric
Opening size
Zipper size
1 cm (3/8ý)
Place right sides of fabric together and sew to the
end of the zipper opening. Reverse stitch to lock the
stitches.
Manually increase the stitch length to 4 and sew the
zipper opening.
4 (Stitch Length)
End of opening
Reverse stitch
¥To Sew
Fold back the left seam allowance.Turn under
the right seam allowance to form a 0.2 to
0.3 cm (1/8Ó) fold. Place the zipper teeth next
to this fold and pin in place.
Attach the zipper foot with the pin on the
right hand side.
Lower the zipper foot on the top side at the
bottom of the zipper so that the needle
pierces the fabric next to the fold and the
zipper tape.
Fold
0.3 cm (1/8Ó)
Stitch line
End of opening
1
1.5Ð4
3Ð6
E: Zipper foot
End of opening
Slider
Zipper teeth
Zipper tape
Straight Stitch
2 cm (3/4Ó)
Opening size
Low fabric
Wrong side of fabric
5024 Owners Manual/ User Guide
27