Table of Contents
Advertisement
q
01
w
12
w
A 2 6
q
w
e
q
SECTION III BASIC SEWING
Straight Stitching
q
Selected stitch
w
A: Zigzag foot
• Starting to Sew
Raise the presser foot and position the fabric next to a seam
guide line on the needle plate (see page 16). Lower the
needle to the point where you want to start. Lower the
presser foot and pull the threads toward the back. Depress
the foot control. Gently guide the fabric along a seam
guide line letting the fabric feed naturally.
• Changing Sewing Direction
Stop the machine and bring the needle down into the
fabric by pressing the up/down needle position key.
Raise the presser foot.
Pivot the fabric around the needle to change sewing
direction as desired. Lower the presser foot.
q
Up/down needle position key
w
Presser foot lifter
• Finishing Sewing
To fasten the ends of seams, press the reverse button and
sew several reverse stitches.
* When pattern
sewn automatically at the beginning of the seam,
and forward again.
Raise the presser foot. Remove the fabric, draw the threads
to the back and cut using the thread cutter.
The threads are cut the proper length for starting the next
seam.
q
Reverse button
w
Thread cutter
e
Fabric
is selected, reverse stitches are
Hide quick links:
Advertisement
Table of Contents
