Table of Contents
Advertisement
SLM-7650 Satellite Modem
Remote Control Specifications
Bulk Consol.
Status
(continued)
Parameter
Number
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Parameter Name
(Command Reference)
Demodulator rate
(ref. 'DR_' command).
Demodulator preset A assignment
(ref. 'ADRA_' command).
Demodulator preset B assignment
(ref. 'ADRB_' command).
Demodulator preset C assignment
(ref. 'ADRC_' command).
Demodulator preset D assignment
(ref. 'ADRD_' command).
Demodulator preset V assignment
(ref. 'ADRV_' command).
Descrambler enable
(ref. 'DE_' command).
Differential decoder
(ref. 'DDEC_' command).
reserved null field.
IF loopback
(ref. 'IFL_' command).
Sweep center frequency
(ref. 'SCF_' command).
Sweep width range
(ref. 'SWR_' command).
Sweep reacquisition
(ref. 'SR_' command).
BER threshold
(ref. 'BERT_' command).
Demodulator type
(ref. 'DT_' command).
Demodulator Decoder Type
(ref. 'DDT_' command).
Transmit clock source
(ref. 'TC_' command).
External reference frequency
(ref. 'ERF_' command).
Description
p17 = nnnn_mmmmm.mmm, code rate/data rate in kbit/s.
p18 = nnnn_mmmmm.mmm, code rate/data rate in kbit/s.
p19 = nnnn_mmmmm.mmm, code rate/data rate in kbit/s.
p20 = nnnn_mmmmm.mmm, code rate/data rate in kbit/s.
p21 = nnnn_mmmmm.mmm, code rate/data rate in kbit/s.
p22 = nnnn_mmmmm.mmm, code rate/data rate in kbit/s.
p23 = n, where 'n' is '0' (off) or '1' (on).
p24 = n, where 'n' is '0' (off) or '1' (on).
p26 = n, where 'n' is '0' (off) or '1' (on).
p27 = snnnnn, sweep center frequency in Hertz.
p28 = nnnnn, sweep range in Hertz.
p29 = nnn, reacquisition time in seconds.
p30 = xxxx, BER threshold.
p31 = n, where 'n' is '0' (EFD) or '1' (INTL).
p32 = n, where 'n' is '1' (Viterbi) or '2' (Turbo).
p33 = n, where 'n' is '0' (INT), ''2' (EXT), 6 (DATA).
p34 = nnnnnn.n, external reference frequency in kHz.
A–38
Revision 4
MN/SLM7650.IOM
Advertisement
Table of Contents
