Comtech EF Data SLM-7650 Installation And Operation Manual page 161

SLM-7650 Satellite Modem
Remote Control Specifications
A.10.1 Asynchronous Interface Commands
ASYNC Command:
Transmit Response:
Overhead
Baud Rate Status:
Response:
ASYNC Command:
Receive Response:
Overhead
Baud Rate Status:
Response:
ASYNC Command:
Transmit Response:
Channel
Character Status:
Length Response:
ASYNC Command:
Transmit Response:
Channel Stop
Bits Status:
Response:
ASYNC Command:
Transmit Response:
Channel
Parity Status:
Response:
ASYNC Command:
Receive Response:
Channel
Character Status:
Length Response:
ASYNC Command:
Receive Response:
Channel Stop
Bits Status:
Response:
ASYNC Command:
Receive Response:
Channel
Parity Status:
Response:
ASYNC Command:
Communica Response:
tions Type
Status:
Response:
<add/TOBR_nnnnn'cr'
>add/TOBR_nnnnn'cr''lf']
<add/TOBR_'cr'
>add/TOBR_nnnnn'cr''lf']
<add/ROBR_nnnnn'cr'
>add/ROBR_nnnnn'cr''lf']
<add/ROBR_'cr'
>add/ROBR_nnnnn'cr''lf']
<add/TCCL_n'cr'
>add/TCCL_n'cr''lf']
<add/TCCL_'cr'
>add/TCCL_n'cr''lf']
<add/TCSB_n'cr'
>add/TCSB_n'cr''lf']
<add/TCSB_'cr'
>add/TCSB_n'cr''lf']
<add/TOCP_xxxx'cr'
>add/TOCP_xxxx'cr''lf']
<add/TOCP_'cr'
>add/TOCP_xxxx'cr''lf']
<add/RCCL_n'cr'
>add/RCCL_n'cr''lf']
<add/RCCL_'cr'
>add/RCCL_n'cr''lf']
<add/RCSB_n'cr'
>add/RCSB_n'cr''lf']
<add/RCSB_'cr'
>add/RCSB_n'cr''lf']
<add/ROCP_xxxx'cr'
>add/ROCP_xxxx'cr''lf']
<add/ROCP_'cr'
>add/ROCP_xxxx'cr''lf']
<add/ACT_xxxxxxxx'cr'
>add/ACT_xxxxxxxx'cr''lf']
<add/ACT_'cr'
>add/ACT_xxxxxxxx'cr''lf']
Where: nnnnn = 110, 150, 300, 600, 1200, 2400, 4800,
9600, 19200, or 38400.
Note: TX ASYNC Overhead only.
Where: nnnnn = 110, 150, 300, 600, 1200, 2400, 4800,
9600, 19200, or 38400.
Note: RX ASYNC Overhead only.
Where: n = 7 or 8 bits.
Note: TX ASYNC Overhead only.
Where: n = 1 or 2 (Stop bits).
Note: TX ASYNC Overhead only.
Where: xxxx = ODD, EVEN, or NONE.
Note: TX ASYNC Overhead only.
Where: n = 7 or 8 bits.
Note: RX ASYNC Overhead only.
Where: n = 1 or 2 (Stop bits).
Note: RX ASYNC Overhead only.
Where: xxxx = ODD, EVEN, or NONE.
Note: RX ASYNC Overhead only.
Where: xxxxxxxx = RS232, RS485 (4- Wire) or RS485_2W
(2-Wire).
Note: ASYNC Overhead only.
A–19
Revision 4
MN/SLM7650.IOM