Comtech EF Data SLM-7650 Installation And Operation Manual page 160

Comtech ef data satellite modem installation and operation manual
Table of Contents

Advertisement

SLM-7650 Satellite Modem
Remote Control Specifications
Bulk Insert
Command:
Channels
Response:
Assignment
Status:
Response:
IDR Backward
Command:
Alarm Enable
Response:
Status:
Response:
IDR Transmit
Command:
ESC Type
Response:
Status:
Response:
IDR Receive
Command:
ESC Type
Response:
Status:
Response:
Terrestrial
Command:
Interface
Response:
Format
Status:
Response:
Terrestrial
Command:
Async Source
Response:
Status:
Response:
<add/BICA_ii;cc_ii;cc_ii;cc... 'cr'
>add/BICA_ii;cc_ii;cc_ii;cc...'cr''lf']
<add/BICA_'cr'
>add/BICA_ii;cc_ii;cc_ii;cc...'cr''lf']
<add/BW_xxx_nnn'cr'
>add/BW_xxx_nnn'cr''lf']
<add/BW_xxx'cr'
>add/BW_xxx_nnn'cr''lf']
<add/TET_xxxxx'cr'
>add/TET_xxxxx'cr''lf']
<add/TET_'cr'
>add/TET_xxxxx'cr''lf']
<add/RET_xxxxx'cr'
>add/RET_xxxxx'cr''lf']
<add/RET_'cr'
>add/RET_xxxxx'cr''lf']
<add/TIF_xxxxx'cr'
>add/TIF_xxxxx'cr''lf']
<add/TIF_'cr'
>add/TIF_xxxxx'cr''lf']
<add/TAS_xx'cr'
>add/TAS_xx'cr''lf']
<add/TAS_'cr'
>add/TAS_xx'cr''lf']
Where:
ii = 1 to n (over the satellite insert channel), where n =
demodulator data rate divided by 64 kbit/s.
cc = 1 to 24 (terrestrial channel number for T1 data formats).
cc = 1 to 31 (terrestrial channel number for E1 data
formats).
cc = 0 (if no insert is desired for the specified insert
channel).
Notes:
1.
The status response returns programming
information for 1 to n insert channels.
2.
Time slot 16 (cc=16) may not be specified when
the insert data format is specified to be E1CAS
3.
This command is not valid when the insert data
format is specified as E1CAS, and the
demodulator data rate is set to 1920.0 kbit/s.
Where:
xxx =TX1, TX2, TX3, TX4, RX1, RX2, RX3, or RX4
(backward alarm designator).
nnn = ON or OFF.
Where: xxxxx = DATA (64K Data) or AUDIO (2x32K Audio).
Note: TX IDR Overhead only.
Where: xxxxx = DATA (64K Data) or AUDIO (2x32K Audio).
Note: RX IDR Overhead only.
Where: xxxxx = J1(RS422), J6 (RS422), G703B (Balanced
G.703), G703U (Unbalanced G.703).
Where: xx = J2 or J6.
A–18
Revision 4
MN/SLM7650.IOM

Advertisement

Table of Contents
loading

Table of Contents