Nautilus T9.16 Owner's Manual page 49

CONSOLE CODES
4. To review the error log and reset the service
timer, press [Speed: UP], [7], [ENTER]. The
console will display DIAGNOSTICS2. Press
[Speed: UP] or [Speed: DOWN] to scan through
the choices. Select the option you want by
pressing [ENTER].
Error log
To display the machine's error log, press
[ENTER] when the message, ERROR LOG, is
displayed. The console will report various
error messages in the display window. The
total amount of errors will be displayed in the
upper right window. Note that only the highest
priority reported error will be displayed. Errors
are handled in two ways. First, as a non-fatal
WARNING which will display the text message
but continue system operation until you press
the [CLEAR] key. The second way is a fatal
ERROR which will stop the exercise and return
the system to an idle intensity state. The
console will display the error text and not let
you restart the program unless power has been
turned off and then back on.
Reset service time
To reset the time between service or
maintenance calls, press [ENTER] when
the message, MAINT HOURS is displayed.
Selecting this code will reset the maintenance
timer to 0 hours.
5. To exit DIAGNOSTICS2, press the [CLEAR] key.
47