Microphones; Pendant Microphone - Extron electronics VoiceLift User Manual

Microphones

Pendant Microphone

The VoiceLift VLP 202 pendant microphone operates via IR at two frequencies: 2.3 MHz
on channels A and C, and 2.8 MHz on channels B and D. The microphone picks up
speech and transmits a signal wirelessly to the VLR 102 receiver. The microphone is
powered by one AA NiMh battery (provided), which can be recharged using the VLC 202
charging station, or one AA alkaline battery.
ATTENTION:
The VLP 202 pendant microphone has the following controls and connections:
Front, side, and top panels
3
Figure 5.
a
Do not recharge alkaline batteries.
1
2
4
VLP 202 Pendant Microphone Top, Front and Side Panels
Pwr LED — This bicolor LED indicates the microphone power, volume, and charging
status as follows:
When the microphone is in use:
LED Color
Green – steady
Green – flashing
Red – flashing
When the microphone is charging:
LED Color
Red – steady
Green – steady
Red and green – flashing
VoiceLift System with PVS 405D • Features and Operation
a
— Pwr (power) LED
b
— Acoustic audio input port
c
— Audio input port (Audio In)
d
— Volume button
7
e
— Battery compartment cover
f
— Battery compartment
g
— Power and mute switch
6
(Off/Mute/On)
5
Indication
Power is on and microphone is functioning.
Volume button is being pressed (volume is changing).
Low battery (1 hour or less of talk time left)
Indication
Battery charging
Battery fully charged
Alkaline or damaged battery is detected.
8