Extron electronics VoiceLift User Manual page 49

8. If you did not add a firmware file in step 5, on the Firmware Loader window
double-click on
<double click to set>
figure 37). A Choose Firmware File window opens.
Figure 37. Double-Click to Select the Firmware File
9. On the Choose Firmware File window, locate the firmware file that you want to
upload, select its name, then click
ATTENTION: The file must have an .s19 extension. Uploading the wrong file type
could cause the receiver to stop functioning.
Figure 38. Choose Firmware File Window
The Choose Firmware File window closes. The new firmware file name is displayed
on the Firmware Loader window in the New Firmware File column.
VoiceLift System with PVS 405D • Reference Information: Updating the Firmware
in the New Firmware File column (see
(see figure 38).
Open
43 43 43