Extron electronics VoiceLift User Manual page 48

• Pass-Thru (via MLC 104 IP or 226 IP)
is connected indirectly through an MLC 104 IP Plus or an MLC 226 IP via a
PoleVault switcher.
Figure 36. Add Device Window for an MLC Pass-through Connection
a. In the
MLC's IP Address or Hostname
MLC. Enter the Telnet port number in the
is ).
23
b. If a password for the MLC exists, enter it in the
c. Click . The
Connect
address, the pass-through port number, and
followed by a check mark.
d.
If you want to edit the pass-through port number, click
number becomes a text field, in which you can enter the new port number.
5. (Optional) In the field in the New Firmware File (Optional) section, you can enter
Path
the path to the new VLR 102 firmware file on your computer or click
and open the file (by default, the firmware file is placed at
Extron\Firmware\VLR_102
NOTE: You can also locate and add the firmware file on the Firmware Loader
main window.
6. (Pass-through only) Click
the Firmware Loader. When you click
Device window is displayed on the Firmware Loader window and the Add Device
window continues to be displayed.
7. Click to close the Add Device window and display the selected device on the
Add
Firmware Loader window.
VoiceLift System with PVS 405D • Reference Information: Updating the Firmware
: Select this option if the receiver
field, enter the IP address of the
Port
field displays the MLC type and IP
Connected Device
when downloaded from the Extron website).
if you intend to add more VLR 102 devices to
Add Next
, the device you entered on the Add
Add Next
field (by default, this number
field.
Admin Password
as the target device,
VLR 102
. The port
Edit Port
to locate
Browse
C:\Program Files\
42 42 42