When this button is pressed, the receiver produces a tone and the Pwr LED blinks.
NOTES:
•
You can disable the tone by setting the Tone DIP switch on the receiver to Off (see
c
DIP switches
on page 21).
•
Volume adjustment works only for microphones set to channel A or B (see
figure 17).
Channel Switch
Figure 17.
Channel Switch on the VLP 202 Pendant Microphone
Handheld microphone volume adjustment
To adjust the volume on the VLH 102 Handheld Microphone:
1.
Remove the battery cover (see
on page 13 for the procedure).
>
2.
Press the Up (
) or Down (
raise or lower the volume.
A B
VOLUME
A B
VOLUME
Figure 18.
Volume Buttons on the Handheld Microphone
3.
Replace the battery cover (see
for the procedure).
VoiceLift System with PVS 405D • Features and Operation
Installing or Replacing the Microphone Battery
<
) button, located below the battery compartment, to
Installing or Replacing the Microphone Battery
18