Extron electronics VoiceLift User Manual page 39

7. Test the instant alert notification as follows:
a. Ensure that the MLC 104 IP Plus is connected to the network and powered on.
b.
Pendant microphone: Ensure that channel A or B has been selected for the
microphone.
c. Handheld microphone: Remove the battery cover.
d. Press and hold both sections of the Volume button on the pendant microphone or
both Volume buttons on the handheld microphone simultaneously for 3 seconds.
The LED in the receiver dome blinks, alternating amber and green.
Press and hold both
sections of the
Volume button
simultaneously.
VLP 202
Figure 30. Testing the Instant Alert
e. Check for the arrival of the e-mail notification.
8. If necessary, make adjustments to the relay and digital input wiring, the monitor
settings, or the e-mail notification settings.
9. Replace the receiver dome in its housing (see
on the handheld microphone, if applicable.
VoiceLift System with PVS 405D • Special Application: Instant Alert
Press and hold both
A B
VOLUME Volume buttons
simultaneously.
VLH 102
page 23) and replace the battery cover
33