Sis Configuration And Control; Overview; Host To Receiver Communications - Extron electronics VoiceLift User Manual

SIS Configuration
and Control
This section describes the serial connection through which the Extron Simple Instruction
Set (SIS) commands can be issued from your host to the VLR 102. It also provides a list
and descriptions of the commands that are available for configuring and controlling the
VoiceLift System. Topics include:
•
•
•

Overview

The VoiceLift VLR 102 Receiver can be controlled via a host computer that is connected
to the RS-232 control port on the receiver. You can issue SIS commands via the
computer RS-232 interface using a communication software program such as Extron
DataViewer or HyperTerminal. SIS commands are available for you to do the following:
•
•
•
Default protocol for the VoiceLift receiver RS-232 port:
•
•
•

Host to Receiver Communications

SIS commands consist of one or more characters per field. No special characters are
required to begin or end a command sequence. When the VLR 102 determines that a
command is valid, it executes the command and sends a response to the host device.
All responses from the receiver to the host end with a carriage return and a line feed
(CR/LF = ] ), which signals the end of the response character string. A string is one or
more characters.
Overview
Host to Receiver Communication
Commands and Responses
Upload firmware
Obtain information and status for VoiceLift ports and system components
Adjust the volume for a specific channel
38400 baud • 1 stop bit
No parity • No flow control
8 data bits
VoiceLift System with PVS 405D • SIS Configuration and Control 25