Connecting The Fm/Am Antennas - Yamaha HTR-5063 Owner's Manual

Connecting the FM/AM antennas

An indoor FM antenna and an AM loop antenna are supplied with this receiver. Connect these antennas
properly to their respective jacks.
Indoor FM antenna
DOCK
NENT
O
VIDEO
Connecting the AM loop antenna
Press and hold
■ Improving FM reception
We recommend using an outdoor antenna. For more information, consult the nearest authorized
dealer.
■ Improving AM reception
Connect this unit to an outdoor antenna with a 5-10 m vinyl-coated wire. Make sure the AM loop
antenna is still connected.
Connecting the GND jack can reduce noise. Connect the jack to a store-bought ground bar or copper
plate with a vinyl-covered wire and bury this new attachment in moist ground.
The GND jack is not to be connected to the ground socket of an electrical outlet.
AM loop antenna
Position the AM antenna away from the receiver.
The wires of the AM antenna have no polarity.
You can connect either wire to the AM jack or the
GND jack.
(BD/DVD)
HDMI OUT
HDMI 1 HDMI 2 HDMI 3
ANTENNA
COMPONENT
VIDEO
FM GND AM
P
R
75 P
B
VIDEO
Y
MONITOR OUT
Insert Release
CONNECTIONS
23
En