Removing A Dvd I/O Board; Figure 7-35 Dvd I/O Board Removal And Replacement - HP Integrity rx4640 Operation And Maintenance Manual
Hide thumbs
Also See for Integrity rx4640:
- User's & service manual (197 pages) ,
- Service manual (167 pages) ,
- Operation manual (90 pages)
Table of Contents
Advertisement
Removing and Replacing Components
DVD I/O Board
Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD safety
precautions could result in damage to the server.
Figure 7-35
DVD I/O Board Removal and Replacement
DVD I/O
board
Removing a DVD I/O Board
To remove a DVD I/O board, perform the following steps:
Step
1. If rack mounted, slide the HP Server out from the rack until it stops. See "Accessing a Rack Mounted Server" on
page 141.
Step
2. Remove the front bezel. See "Front Bezel" on page 144.
Step
3. Remove the front cover. See "Front and Top Covers" on page 145.
Step
4. Remove the memory extender board. See "Memory Extender Board" on page 151.
212
Cover
Chapter 7
Advertisement
Table of Contents
Troubleshooting
