HP Integrity rx4640 Operation And Maintenance Manual page 194
Hide thumbs
Also See for Integrity rx4640:
- User's & service manual (197 pages) ,
- Service manual (167 pages) ,
- Operation manual (90 pages)
Table of Contents
Advertisement
Removing and Replacing Components
Voltage Regulator Modules (VRM)
Step
1. Push the VRM straight into the slot until it stops, then push in the two locking tabs on either side of the slot to lock
the VRM into position.
CAUTION
Step
2. Replace the I/O baseboard in the chassis.
194
Ensure that the VRM and slot voltages match up and also check that the heatsink on the VRM
faces the PCI card rack after installation. If the VRM is inserted backwards the system will halt
during the boot process.
Chapter 7
Advertisement
Table of Contents
Troubleshooting
