Dvd I/O Board - HP Integrity rx4640 Operation And Maintenance Manual

DVD I/O Board

The DVD I/O board is located under a metal cover that is directly under DVD location at the front left of the chassis.
WARNING
Ensure that the system is powered down and all power sources have been disconnected from the server
prior to removing or replacing a DVD I/O board.
Voltages are present at various locations within the server whenever an AC power source is connected.
This voltage is present even when the main power switch is in the off position.
Failure to observe this warning could result in personal injury or damage to equipment.
CAUTION
Failure to properly complete the steps in this procedure will result in erratic system behavior or system failure.
For assistance with this procedure contact your local HP Authorized Service Provider.
Chapter 7
Removing and Replacing Components
DVD I/O Board
211