HP Integrity rx4640 Operation And Maintenance Manual page 170

Hide thumbs Also See for Integrity rx4640:
Table of Contents

Advertisement

Removing and Replacing Components
Hot-Swap Chassis Fan Unit
CAUTION
Step
3. Check the QuickFind diagnostic board LED indicating the replaced fan unit.
When the fan is functioning normally, the LED is off.
When the fan fails, the LED is lit.
Step
4. Replace the top cover.
Step
5. If rack mounted, slide the HP Server into the rack until it stops.
170
If the fan unit handle does not close completely it is misaligned. Remove the fan unit and check
that the alignment icons are oriented correctly.
Chapter 7

Advertisement

Table of Contents
loading

Table of Contents