Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills
DIAGNOSTICS: SYSTEM COMMUNICATION(COMM) TEST
Upon entry into this category, a SYSTEM COMMUNICATION (COMM) TEST will be performed automatically.
This test will attempt to communicate with all of the modules within the treadmill unit. If a module does not respond
to the console processor an ERROR message will be displayed.
If all the modules communicate, the message is:
SYSTEM COMM OK
If the motor controller module does not communicate, the initial message will display:
MOTOR CONTROLLER COMM BAD
If the harness is disconnected the message is:
If the motor controller has no power, the message is:
If the wax/lift board module does not communicate, the message is:
If both the motor controller module and the wax/lift board module do not communicate, the message is:
If the wax/lift and motor controller has no power, the message is:
If the main harness from the console to the wax/lift board is disconnected, the message is:
9