Page 1
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTIC ENTRY Diagnostics is entered by three methods: 1. Hold down the PAUSE Key until the SERVICE MENU appears, and press the STOP Button. 2. Hold down the PAUSE Key until the SERVICE MENU appears, and press CLEAR Key twice 3.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills MAINTENANCE CONFIGURATION – QUICK ENTRY REFERENCE Diagnostic selections can also be made by pressing a combination of program keys. The following is the list of diagnostic tests and their program key combination. All blank fields in the chart are considered “OFF”...
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM COMMUNICATION(COMM) TEST Upon entry into this category, a SYSTEM COMMUNICATION (COMM) TEST will be performed automatically. This test will attempt to communicate with all of the modules within the treadmill unit. If a module does not respond to the console processor an ERROR message will be displayed.
Page 5
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM COMMUNICATION(COMM) TEST If both the motor controller module and the wax/lift board module do communicate, but the console cannot perform a loop-back test, the message is: SYSTEM CONFIGURED TWO WIRE If SYSTEM COMM OK is displayed it will advance to the system test category.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST MENU Upon entry the, the message is: SYSTEM TEST MENU “USE ARROW KEYS TO SCROLL THROUGH THE LIST” Using any of the arrow keys will allow you to scroll through the thirteen system tests.
Life Fitness Modes 97Ti, 95Ti, and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – SPEED AUTOMATIC MODE SPEED AUTOMATIC Upon entry into this test the letters SA (speed automatic) will be in the profile window. This test allows the user to test the main drive motor and controller controlling the target speed. The user can select a target speed by using the speed arrow keys.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – SPEED MANUAL MODE SPEED MANUAL Upon entry into this test the letters SM (Speed Manual) will be in the profile window. This test allows the user to test the main drive motor and controller controlling the motor rpm.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – CONTROLLER ERRORS MODE CONTROLLER ERRORS Upon entry into this test the letters SE (speed errors) will be in the profile window. This test allows seeing the current motor controller error conditions that are being displayed on the motor controller display.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – INCLINE AUTOMATIC MODE INCLINE AUTOMATIC Upon entry into this test the letters IA (incline automatic) will appear in the profile window. This test allows the user to test the lift motor and switches controlling the target incline.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – INCLINE MANUAL MODE INCLINE MANUAL Upon entry into this test the letters IM (incline manual) will be in the profile window. This test allows the user to bypass the electromechanical switches that normally control the target incline.
Page 12
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – INCLINE ERROR MODE INCLINE ERRORS Upon entry into this test the letters IE (incline errors) will be in the profile window. This test allows seeing the current lift motor error conditions.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – WAXER AUTOMATIC MODE WAXER AUTOMATIC Upon entry into this test the letters WA (waxer automatic) will be in the profile window. This test allows the user to see information concerning the wax motor.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – WAXER MANUAL MODE WAXER MANUAL Upon entry into this test the letters WM (waxer manual) will be in the profile window. This test allows the user to manually fire the wax system.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – WAXER ERROR MODE WAXER ERRORS Upon entry into this test the letter WE (waxer errors) will be in the profile window. This test allows you to see the current wax motor error conditions.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – BELT / DECK MODE This test allows the user to test the belt and deck condition. This test acts as a wattage meter. It will give the user the percentage of power, wattage, bus voltage, and temperature readings.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – LIFEPULSE™ MODE LIFEPULSE ON/OFF Upon initial entry to this test, a message concerning the configuration of the LifePulse™ system On/Off will occur. This test will allow the user to test the LifePulse™ heart rate system.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – TELEMETRY MODE HEART RATE=XXX Upon initial entry to this test, a message concerning the telemetry system on/off will occur. This test will allow the user to test the telemetry heart rate system. If the telemetry heart rate system is OFF, no heart rate value will be given.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – SMART STOP MODE SMART STOP ON Upon entry into the test, if the smart stop PCB is not plugged in, a message will be displayed “Smart Stop Unplugged”.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – DIPLAY TEST MODE This test will light each individual segment per character until complete. It will then light each character separately until all characters have been lit. Each individual led will be tested also. If the ‘PAUSE’ key is pressed, the sequence will halt and remain there until the ‘PAUSE’...
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – REAL TIME CLOCK MODE CLOCK SET TO XXX This test allows the user to see the current time set on the frame tag real time clock. If the communication is bad or the frame tag is unplugged the following messages will appear.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – FRAME TAG EEPROM MODE TESTING EEPROM XXX This test allows the user to test the frame tag EEPROM. This test will read/write/replace all used locations in the frame tag EEPROM.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – DISPLAY CONSOLE EEPROM TEST MODE This test allows the user to test the display console EEPROM. This test will read/write/replace all used locations in the display console EEPROM. The EEPROM location being tested will be displayed in the heart rate window. If there is an error, the bad location will be displayed.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – LIFECENTER TEST MODE LIFECENTER TEST This test will give information concerning whether there is a lifecenter system connected to the treadmill. The following is a list of the current information that can be seen:...
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: SYSTEM TEST – C-SAFE TEST MODE C-SAFE TEST This test will give information concerning whether there is a C-SAFE system connected to the treadmill. The following is a list of the current information that can be seen:...
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: INFORMATION MENU Upon entry into the area, the message is: INFOrmation MENU Followed by, Using any of the arrow keys will allow you to scroll through the eight system information areas.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: INFORMATION – SYSTEM STATISTICS MODE SYSTEM STATISTICS This area will allow the user to see system information concerning the following areas: DISPLAYED INFORMTION TOTAL HOURS MANUAL PROGRAM SELECTIONS TOTAL MILES...
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: INFORMATION – SOFTWARE VERSION MODE SOFTWARE VERSIONS This area will allow the user to see system information concerning the following areas: DISPLAYED INFORMATION CONSOLE SOFTWARE VERSION WAX/LIFT BOARD SOFTWARE VERSION...
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: INFORMATION – MAIN MOTOR INFO MODE MAIN MOTOR INFO This area will allow the user to see the current information about the main motor and motor controller. The information will cover the following areas:...
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: INFORMATION – LIFT MOTOR INFO MODE LIFT MOTOR INFO This area will allow the user to see the current information about the lift motor. The information will cover the...
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: INFORMATION – WAX MOTOR INFO MODE WAX MOTOR INFO This area will allow the user to see the current information about the wax motor. The information will cover the...
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: INFORMATION – CLOCK INFO MODE CLOCK INFO This area will allow the user to see the current information about the real time clock. The information will cover the following areas:...
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: INFORMATION – SYSTEM ERROR MODE SYSTeM ERRORS This area will allow the user to see the last 25 logged system errors. The error information will be displayed from the most recently logged to the oldest. Each system error will be displayed in the following format.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: INFORMATION – MAINTENANCE INFO MODE MAINTENANCE INFO This area will allow the user to see the last 12 logged system repairs. The repair information will be displayed from the most recently logged to the oldest. Each system repair will be displayed in the following format.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: MAINTENANCE MENU Upon entry into the area, the message is: MAINTENANCE MENU Followed by, Using any of the arrow keys will allow you to scroll through the ten system maintenance procedures.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: CONFIGURATION MENU Upon entry into the area, the message is: CONFIGURATION MENU Followed by, Using any of the arrow keys will allow you to scroll through the three system configuration areas.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: CONFIGURATION – MANAGER CONFIGURATION MODE The information will automatically scroll every 3 seconds or using the ‘TIME UP’ or ‘TIME DOWN’ arrow keys will allow you to scroll through the configuration items.
Page 38
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: CONFIGURATION - MANAGER CONFIGURATION MODE (Continued) This area will allow the user to see the current configuration about the system. The information will cover the following areas: CONFIGURATION FACTORY...
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: CONFIGURATION – MANUFACTURER CONFIGURATION MODE The following message is for factory use only.
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills DIAGNOSTICS: CONFIGURATION – CLOCK CONFIGURATION MODE This area will allow the user to set the clock configuration in the system. The information can be obtained by using the ‘ENTER’ key to scroll the day, date, and time.
Page 41
Life Fitness Model 97Ti, 97Te, 95Ti, 95Te and 93T Treadmills NOTE...