Frame Tag Board - Life Fitness 97Ti Service Manual

Life Fitness Model 97Ti, 95Ti, 93T, 97Te, and 95Te Treadmills
How To... Replace the Frame Tag Board
Special Service Tools Required: NONE
Note: Units with Configuration No. 1, requires removal
of the Motor Controller. Units with Configuration No. 2,
requires removal of the Wax Lift Board.
1. Turn the unit power OFF at the switch, and then
unplug the line cord at the wall outlet.
2. Remove the inside Upright Covers, Front Cover,
and Motor Cover. See "How to..." in this section.
3. Units with Configuration No.1: Remove the Motor
Controller Assembly and Fan. See "How to..." in
this section.
4. Units with Configuration No. 2:
Remove the Wax Lift Assembly. See
"How To..." in this section.
Configuration No. 1
Motor
Controller
PCB
Configuration No. 2
38
Motor Control
Wax Lift PCB
Frame Tag
Board