Diagnostics Menu Instructions; Accessing Diagnostics; How To Move Around In Diagnostics; User Menu States - Life Fitness T3 Service Manual
T-series consumer treadmills
Hide thumbs
Also See for T3:
- Owner's manual (26 pages) ,
- Assembly instructions manual (8 pages) ,
- Assembly & user manual (34 pages)
Table of Contents
Advertisement
Life Fitness T-Series Consumer Treadmills
DIAGNOSTICS MENU INSTRUCTIONS
ACCESSING DIAGNOSTICS
Press the Stop button twice in a row and then hold down the Quick Start-Walk button or
alternatively hold down the Quick Start-Walk button and turn the treadmill ON. The console will
st
automatically jump into the 1
diagnostic state. TheT3/5 console the Time LED will be lit to
st
indicate that you are in the 1
state.
HOW TO MOVE AROUND IN DIAGNOSTICS
Use the ENTER button to move forward through the diagnostics states as listed below. Use the
STOP button to move backwards.
HOW TO EXIT DIAGNOSTICS
There are two ways to exit diagnostics. You can just turn OFF the treadmill (all setting will be
saved). Or you can keep pressing the STOP button to move all the way back to the beginning of
diagnostics and then out of diagnostics.
USER MENU STATES
The diagnostic states are as follows:
• 1. Software Version Numbers
• 2. Display Test Mode
• 3. Keypad Test Mode
• 4. Motor Test Mode
• 5. Treadmill Statistics
• 6. Photoshoot Mode
Section 2
3
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
