Ricoh 917F Operating Instructions Manual page 1694

1. When the Machine Does Not Operate As Wanted
Problem
Nothing happens when the
operation switch is turned on.
1
"Please wait." appears.
"Please wait." appears.
"Please wait." appears.
The user code entry screen is
displayed.
The Authentication screen
appears.
Authentication failed.
Authentication failed.
16
Cause
The main power switch is
turned off.
This message appears when
you turn on the operation
switch.
If the machine has not been in
use for a long time, it may take
longer than normal to print or
start up when switched on.
This message appears when
you change the toner
cartridge.
Users are restricted by User
Code Authentication.
Basic Authentication,
Windows Authentication,
LDAP Authentication or
Integration Server
Authentication is set.
The entered login user name
or login password is not
correct.
Cannot access the
authentication server when
using Basic Authentication,
Windows Authentication,
LDAP Authentication, or
Integration Server
Authentication.
Solution
Turn on the main power switch.
Wait for a while. If the machine does not
get ready in a minute, contact your
service representative.
• Wait for a while. If the machine
does not get ready in a couple of
minutes, contact your service
representative.
• Wait until the message disappears.
Do not turn off the main power
switch while the message is
showing.
Wait for a while. If the message does not
disappear in two minutes, contact your
service representative.
Enter the user code (up to eight digits),
and then press the [OK] or [ ] key.
Enter your login user name and user
password. See "When the
Authentication Screen is Displayed",
About This Machine
Inquire the user administrator for the
correct login user name and login
password.
Contact the administrator.
.