Ricoh 917F Operating Instructions Manual page 1551

8. Specifying the Extended Security Functions
Web Image Monitor settings
Category
Security/SSL/
TLS
Security/IPsec
Security/IPsec
• You can set "Permit SSL/TLS Communication" using either Web Image Monitor or the machine's
control panel.
Settings you can Configure when IPsec is Unavailable
8
If IPsec is not available, configure the settings shown in the following table to enhance the security of the
data traveling on your network.
System Settings(Control panel)
Tab
Interface Settings Network / IPsec
Interface Settings Permit SSL/TLS Comm.
Web Image Monitor settings
Category
Security
Address
Book/E-mail
232
Item
Permit SSL/TLS
Communication
Encryption Key
Manual Settings
Encryption Key
Auto Exchange
Settings/Security
Level
Item
Item
S/MIME
User Certificate
Setting
If you set "Exclude HTTPS Communication" to
Active, you must also set "Permit SSL/TLS
Communication" to Ciphertext Priority.
Inactive
Authentication and High Level Encryption
Setting
[Inactive]
[Ciphertext Only]
Setting
"Encryption Algorithm": 3DES-168 bit
You must register the user certificate in order to
use S/MIME.
You must register the user certificate in order to
use S/MIME.