Advertisement
2. Equipment and Software Validated
The following equipment and software/firmware were used for the sample configuration provided:
Avaya S8300 Media Server with Avaya G350
Media Gateway
Avaya SIP Enablement Services (SES)
Avaya 4620SW IP Telephones
Avaya 6408D Digital Telephone
Analog Telephones
Analog Fax Machines
Windows PCs
AudioCodes MP-118 Analog VoIP Gateway
3. Configure Avaya Communication Manager
The communication between Avaya Communication Manager and Avaya SES is via a SIP trunk
group. All SIP signaling for calls between Avaya Communication Manager and the MP-118 passes
through Avaya SES via this trunk group. This section describes the steps for configuring this trunk
group and associated signaling group. In addition, this section describes the configuration of stations
as OPS stations, which is required for each analog telephone, and fax machine connected to the MP-
118.
The following configuration of Avaya Communication Manager was performed using the System
Access Terminal (SAT). After the completion of the configuration in this section, perform a save
translation command to make the changes permanent.
CTM; Reviewed:
SPOC 11/29/2007
Equipment
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
Software/Firmware
Avaya Communication Manager 3.1.2
(R013x.01.2.635.0)
This is a post-GA build needed to
support T.38 fax with the MP-118.
3.1 (build 18)
SIP version 2.2.2
H.323 version 2.3
-
-
-
Windows XP Professional
5.00A.011.008
4 of 51
AudioCodesMP118.doc
Advertisement
