Advertisement
4. Configure Avaya SES
This section covers the configuration of Avaya SES. Avaya SES is configured via an Internet
browser using the administration web interface. It is assumed that Avaya SES software and the
license file have already been installed on the server. During the software installation, the
installation script is run from the Linux shell of the server to specify the IP network properties of the
server along with other parameters. For additional information on these installation tasks, refer to
[5].
Step
1.
Access the Avaya SES administration web interface by entering
http://<ip-addr>/admin
address of the Avaya SES server.
Log in with the appropriate credentials and then select the Launch Administration
Web Interface link from the main page as shown below.
CTM; Reviewed:
SPOC 11/29/2007
as the URL in an Internet browser, where <ip-addr> is the IP
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
Description
15 of 51
AudioCodesMP118.doc
Advertisement
