Advertisement
Step
18.
IP to Hunt Group Routing Table
From the menu shown in Step 16, navigate to Routing Tables
Routing.
This table defines the mapping of IP calls to a group of channels or "hunt group". In
Step 19, the FXS ports are assigned to hunt group 1 and the FXO ports are assigned to
hunt group 2. The Dest. Phone Prefix, Source Phone Prefix and Source IP Address
columns define which calls are mapped to the hunt group in the Hunt Group ID
column. In the first entry in the example below, all calls to any extension 40108 -
40111 from any source extension and source IP will be routed to hunt group 1. The #
at the end of the Dest. Phone Prefix field indicates "end of number". Thus, the dialed
number must be an exact match with an extension and not simply a match on the prefix
of 40108 - 40111.
The second entry routes any other call to hunt group 2. Even though Avaya
Communication Manager will not route any other calls to the MP-118 except calls to
the extensions 40108 – 40111, this entry is needed for the failover case. If a user dials
an outbound number and it can not reach the main site, this table will direct the call to
hunt group 2 which contains the FXO ports.
Click Submit.
CTM; Reviewed:
SPOC 11/29/2007
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
Description
IP to Trunk Group
38 of 51
AudioCodesMP118.doc
Advertisement
