Advertisement
Step
11.
Use the change locations command to assign the default SIP route pattern to the
location. In the compliance test, all SIP endpoints whether at the main or branch site
are part of a single location defined in Avaya Communication Manager. This location
uses the default name of Main and is shown in the example below. Enter the route
pattern number from the previous step in the Proxy Sel. Rte. Pat. field. The default
values may be retained for all other fields.
change locations
Loc.
Name
No.
1:
Main
2:
3:
12.
All SIP stations are configured as OPS stations on Avaya Communication Manager.
This includes the analog telephones, and fax machine connected to the MP-118, which
appear as SIP stations to Avaya Communication Manager.
Use the display system-parameters customer-options command to verify Avaya
Communication Manager has sufficient OPS capacity available to add the OPS stations
needed for the SIP and analog endpoints at the branch office in Figure 1. If there is
insufficient capacity, contact an authorized Avaya sales representative or business
partner to make the appropriate changes.
display system-parameters customer-options
G3 Version: V13
Location: 1
Platform: 13
CTM; Reviewed:
SPOC 11/29/2007
LOCATIONS
ARS Prefix 1 Required For 10-Digit NANP Calls? y
Timezone Rule
Offset
+ 00:00
0
OPTIONAL FEATURES
Platform Maximum Ports: 900
Maximum XMOBILE Stations: 0
Maximum Off-PBX Telephones - EC500: 50
Maximum Off-PBX Telephones -
Maximum Off-PBX Telephones - SCCAN: 0
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
Description
NPA
ARS
Attd
FAC
FAC
RFA System ID (SID): 1
RFA Module ID (MID): 1
Maximum Stations: 450
OPS: 50
Page
1 of
4
Pre-
Proxy Sel.
fix
Rte. Pat.
1
Page
1 of
10
USED
121
41
0
0
23
0
11 of 51
AudioCodesMP118.doc
Advertisement
