Advertisement
Step
17.
On Page 2, set the Call Limit to the number of call appearances set on the station form
in Step 15. Verify that the Mapping Mode is set to both. This setting allows the OPS
station to both originate and terminate calls.
add off-pbx-telephone station-mapping
Station
Extension
40108
18.
Repeat Steps 13 -17 for each remaining endpoint located at the branch office. The
branch office has five user endpoints: two analog telephones connected to the MP-118
(x40108 and x40109), two Avaya 4600 Series SIP Telephones (x40101 and x40102),
and a fax machine (x40110). In this configuration, the MP-118 gateway itself must
also be registered as a separate endpoint. For the compliance test, extension 44444 was
created for this purpose with the same characteristics as the Avaya SIP telephones at
this site.
19.
To map a DID number to a station at the main or branch office, use the change inc-
call-handling-trmt trunk-group n command, where n is the trunk group number
connected to the PSTN from the Avaya G350 Media Gateway. The compliance test
used trunk group 2 to connect to the PSTN. This trunk group configuration is not
shown in these Application Notes. The example below shows two incoming 11-digit
numbers being deleted and replaced with the extension number of the desired station.
change inc-call-handling-trmt trunk-group 2
Service/
Feature
tie
tie
CTM; Reviewed:
SPOC 11/29/2007
STATIONS WITH OFF-PBX TELEPHONE INTEGRATION
Call
Mapping
Limit
Mode
2
both
INCOMING CALL HANDLING TREATMENT
Called
Called
Len
Number
11
17325551234
11
17325551236
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
Description
Calls
Bridged
Allowed
Calls
all
both
Del
Insert
11
40104
11
40108
Page
2 of
2
Page
1 of
3
14 of 51
AudioCodesMP118.doc
Advertisement
