Advertisement
Step
6.
From the left pane of the administration web interface, expand the Media Servers
option and select Add to add the Avaya Media Server to the list of media servers
known to Avaya SES. Adding the media server will create the Avaya SES side of the
SIP trunk previously created in Avaya Communication Manager.
On the Add Media Server Interface page, enter the following information:
A descriptive name in the Media Server Interface Name field (e.g. S8300).
In the Host field, select the Avaya SES server from the pull-down menu that
will serve as the SIP proxy for this media server. Since there is only one Avaya
SES server in this configuration, the Host field is set to the host shown in Step
5.
Select TLS (Transport Link Security) for the SIP Trunk Link Type. TLS
provides encryption at the transport layer. TLS is the only link protocol that is
supported for communication between Avaya SES and Avaya Communication
Manager.
Enter the IP address of the Avaya S8300 Media Server in the SIP Trunk IP
Address field. In alternative configurations that use a C-LAN board, the SIP
Trunk IP Address would be the IP address of the C-LAN board.
The default values may be retained for all other fields.
After completing the Add Media Server Interface page, click the Add button.
CTM; Reviewed:
SPOC 11/29/2007
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
Description
20 of 51
AudioCodesMP118.doc
Advertisement
