Equipment And Software Validated; Configure Avaya Communication Manager; Avaya Communication System Parameters Special Applications - Avaya QuesCom 400 Application Notes

2. Equipment and Software Validated

Equipment
Avaya S8500 Media Server – Avaya Communication
Manager
Avaya C364T-PWR Converged Stackable Switch
Avaya 4620SW IP Telephones
Avaya G650 Media Gateway
TN2312BP IP Server Interface
TN799DP C-LAN Interface
TN2302AP IP Media Processor
TN464CP DS1 Interface
QuesCom 400 IP/GSM
Additional patch needed during compliance testing

3. Configure Avaya Communication Manager

Initial configuration of Avaya Communication Manager is beyond the scope of these Application
Notes. See Section 9 for Avaya documentation references. This section illustrates the
configuration of the H.323 trunk groups and signalling groups, dial plan, ARS analysis, and route
patterns used in the compliance-tested configuration. The steps are performed from the System
Access Terminal (SAT) interface.

3.1. Avaya Communication System parameters Special Applications

Step
1. Display the system-parameters special-applications command and ensure that (SA8507) -
H245 Support With Other Vendors? is set to "y". If not, contact your Avaya authorized sales
representative to enable this feature. Note: This feature only needs to be enabled if FastStart is
enabled on the QuesCom 400 IP/GSM.
display system-parameters special-applications
(SA8481) - Replace Calling Party Number with ASAI ANI? n
(SA8510) - NTT Mapping of ISDN Called-Party Subaddress IE? n
HJP; Reviewed:
SPOC 9/14/2006
SPECIAL APPLICATIONS
(SA8500) - Expanded UUI Display Information? n
(SA8506) - Altura Interoperability (FIPN)? n
(SA8507) - H245 Support With Other Vendors? y
(SA8508) - Multiple Emergency Access Codes? n
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
3.1.2 (03.1-01.0.632.1)
IAD04.20 B029 P006
ProxyH323.dll version
Description
Software
4.3.12
2.2.3
-
30
17
110
18
4.20.017
Page 4 of
3 of 27
QuescomACM_H323
6