Advertisement
Step
6.
Proxy and Registration
From the menu shown in Step 5, navigate to Protocol Definition
Registration. Configure the parameters as described below.
For the Enable Proxy field, select Use Proxy from the pull-down menu.
In the Proxy IP Address field, enter the IP address of the Avaya SES.
For the Enable Proxy Keep Alive field, select Using Options from the pull-
down menu. The MP-118 will use the SIP OPTIONS message as a handshake
mechanism with the Avaya SES to determine if the SIP connection is up. If the
connection is down, the MP-118 will failover to the FXO ports.
For the Always Use Proxy field, select Enabled.
For the Send All Invite to Proxy field, select Yes. This directs the MP-118 to
send all INVITE requests to the Avaya SES, including those generated as the
result of a transfer or redirect.
For the Enable Registration field, select Yes. This will allow the MP-118 to
register the FXS endpoints with the Avaya SES.
In the Registrar IP Address field, enter the IP address of the Avaya SES.
Default values may be retained for all other fields. Scroll down to continue
configuring parameters on the lower half of the screen.
CTM; Reviewed:
SPOC 11/29/2007
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
Description
Proxy &
26 of 51
AudioCodesMP118.doc
Advertisement
