Make An Outgoing Call During Ptt; End Or Leave A Ptt Call - AT&T TL96273 Complete User's Manual

Multiple handset
Push-to-talk (PTT)

Make an outgoing call during PTT

Using a cordless handset or the telephone base:
• During a one-to-one PTT call, press
press HOME
automatically.
• During a one-to-group PTT call, press
handset, or press
automatically and you get a dial tone.
• During a one-to-group PTT call, press
destination handsets, or press
That handset or telephone base gets a dial tone. The PTT call continues for
the rest of the PTT participants.

End or leave a PTT call

For a one-to-one PTT call, both the originating and destination devices can
end the PTT call. For one-to-group PTT calls, the initiating devices can end the
PTT call for the group of devices on that PTT call. If any one of the destination
devices leaves the PTT call, the call continues until all participants or the
initiator hangs up.
Using a cordless handset or the telephone base:
Press OFF/
CANCEL
the telephone base. The screen shows Push to talk Ended.
-OR-
Place the handset in the telephone base or charger, then the handset return
to idle mode.
NOTES: After PUSH TO TALK on the handset or PTT on the telephone base is released, the
PTT call remains open for a short time. If no one presses PUSH TO TALK on the handset or
PTT on the telephone base within 10 seconds, the PTT call ends automatically.
on the telephone base to get a dial tone. The PTT call ends
HOME on the telephone base. The PTT call ends
or END on the handset, or press CANCEL or
HOME/
FLASH
HOME/
FLASH
HOME/
FLASH
HOME on the destination telephone base.
77
on your handset or
on the initiating
on any one of the
END on