Ptt To Multiple Devices - AT&T TL96273 Complete User's Manual

Multiple handset
Push-to-talk (PTT)

PTT to multiple devices

When there are multiple handsets registered to the phone system, PTT supports
one-to-group calls. PTT supports a maximum of one-to-four calls when two to
five handsets are registered, and a maximum of one-to-three calls when six or
more handsets are registered. The first four registered handsets will be eligible
to use this feature. Other handsets can only use PTT for one-to-one calls.
To call multiple devices:
Using a cordless handset:
1. You have two ways to call multiple devices. When the handset is not in use:
Press and hold PUSH TO TALK until the handset shows Connecting to
•
group...
-OR-
Press PUSH TO TALK in idle mode. Press
•
Group, then press
Your handset displays Connecting to group... for a few seconds. When the
connection is made, both your and the destination handsets display
Press and hold [PTT] to talk and beep once.
2. Press and hold PUSH TO TALK on your handset. A chirp indicates your
microphone is on. Speak towards the handset. Your voice is broadcast to all
devices.
3. Release PUSH TO TALK after speaking. All devices beep once again. After
the handsets beep, you can press and hold PUSH TO TALK to continue
speaking or the destination devices can respond (see Answer a PTT call on
page 75).
4. Press OFF/
Push to talk Ended for a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call. The
handset displays Push to talk Ended for a few seconds.
NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one
presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.
SELECT
or END
CANCEL
or PUSH TO TALK.
to end the PTT call. The handset displays
73
or to highlight
CID DIR