AT&T TL96273 Complete User's Manual page 25

Bluetooth
Bluetooth setup
6. Press NEXT
mode. The screen displays Set cell to search base:
AT&T DECT 6.0 PIN: 0000.
7. Promptly turn on the Bluetooth feature of your cell
phone and search for or add new devices. Once your
cell phone finds your AT&T phone (AT&T DECT 6.0), press the appropriate
key on your cell phone to continue the pairing process.
• Your cell phone may require a passcode. In this case, the telephone
base displays Check cellular. ENTER PASS CODE. Enter the cell phone
passcode (typically 0000) into the handset and press SET.
• Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process if required. The telephone base displays
Adding Cell Phone A.
When a device is successfully connected, the telephone
base displays Cell Phone A is added and connected
to base and you hear a confirmation tone. The
corresponding status icon (
the handset. The corresponding device light on the
telephone base (CELL 1 or CELL 2/HEADSET ) turns on.
If you have trouble pairing your cell phone, it may not be compatible with
your TL96273/TL96323/TL96373/TL96423/TL96473. Check the Bluetooth
compatibility list at
NOTES:
• The pairing process may take up to one minute. If the pairing process fails, try again.
• Refer to the user's manual of your cell phone on how to search for or add a new Bluetooth
device.
to turn on the telephone base discoverable
www.telephones.att.com/bluetooth
1 or 2) displays on
19
Set cel l to
search base:
AT&T DECT 6.0
PIN:0000
Adding
Cel l Phone A
Cel l Phone A
is added
and connected
to base.
.