Use Caller Id To Automatically Set Date And Time; Dial Mode; Website - AT&T TL86109 User Manual

Telephone settings
Handset settings

Use caller ID to automatically set date and time

You can turn this feature on so that the date and time are
set automatically by incoming caller ID information.
1. Press the MENU softkey on the handset in idle mode to
enter the main menu.
2. Press or
SELECT softkey.
3. Press or
SELECT softkey.
4. Press or
SELECT softkey.
5. Press or
softkey to confirm. You hear a confirmation tone.

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To change the setting:
Press the MENU softkey on the handset in idle mode to
1.
enter the main menu.
2. Press or
SELECT softkey.
3. Press or
SELECT softkey.
4. Press or
softkey to confirm. You hear a confirmation tone.
NOTE: While you are on a call in pulse dialing mode, press TONE
temporarily change to tone dialing mode.

Website

You can use this feature to view the AT&T website address
for product support or accessory purchasing.
1. Press the MENU softkey on the handset in idle mode to
enter the main menu.
2. Press or
SELECT softkey. The handset screen shows the AT&T
website address.
3. Press the OK softkey to exit.
to highlight SETTINGS, then press the
to highlight Set date/time, then press the
to select CID time sync, then press the
to select On or Off, then press the SET
to highlight SETTINGS, then press the
to highlight Dial mode, then press the
to choose Tone or Pulse, then press the SET
to scroll to WEBSITE, then press the
38
SETTINGS
Display alerts
Key tone
Set date/time
BACK SELECT
SET DATE/TIME
Date/time
CID time sync
BACK SELECT
CID TIME SYNC
On
Off
BACK SET
SETTINGS
Key tone
Set date/time
Dial mode
BACK SELECT
DIAL MODE
Tone
Pulse
BACK SET
to
WEBSITE
BACK SELECT
www.telephones
.att.com
BACK OK