Chapter 4. Maintenance And Specifications; Introduction; Maintenance; Changing The Battery - Symbol P 370 RF Reference Manual

Introduction

This chapter explains how to maintain your scanner and the specifications for it.

Maintenance

Do not allow any abrasive material to touch the scanner window.
!
Remove any dirt particles with a damp cloth.
!
Wipe the scanner window using a damp cloth, and if necessary, a non-ammonia
!
based detergent.
Do not spray water or other cleaning liquids directly into the scanner window.
!
If the contacts between the scanner and cradle become dirty, clean them with either
!
a pencil eraser or a cotton swab dampened with alcohol.
Change the battery when it no longer provides 8 hours of scanning in typical usage.
!
This should occur after 2 years or more, depending on your daily use.

Changing the Battery

Once a battery is fully charged, it will generally last up to 10 hours without being returned
to the cradle. By returning it to the cradle during the day, you extend this time.

Removing the Battery

1. Slide the release latch down using center indent and remove the cover.
Figure 4-1. Removing the Battery Compartment Cover
Battery
Compartment
Cover
Maintenance And Specifications
Battery
Release Latch
4-3