Mcl Pos Host - Symbol P 370 RF Reference Manual

P 370/470 RF Scanner Product Reference Guide

MCL POS Host

Scan the appropriate barcode below to choose MCL-Net or Other as the host to be used by
the default application during POS mode. Choosing MCL-Net enables the scanner to
communicate with a host running MCL-Link. Choosing Other selects a standard RS-232 or
Synapse host, as defined by the system installation. (If a Synapse cable is installed, it will be
detected and used, otherwise the RS-232 host will be used.)
Note: This parameter ONLY affects the default application. Users are free
to program their own application to use NI/NO commands to
interact with an MCL-Link host or SI/SO commands to communicate
on the RS-232/Synapse interface
5-100
POS USE MCL-NET HOST
POS USE OTHER HOST