Symbol P 370 RF Reference Manual page 26

P 370/470 RF Scanner Product Reference Guide
RS-232 Connection
1. Make sure all host devices are powered down.
2. Plug the connector at the end of the cradle's cable into an appropriate RS-232
receiving port on the host device.
3. Plug the other end of the cable into the COM1 connector on the cradle.
4. Connect the power connector of the power supply (p/n 59-14000-101) into the
Power port on the cradle.
5. Connect the appropriate line cord to the power supply and into an AC receptacle.
6. The indicator light on the cradle blinks, signifying successful power-up.
7. Rotate the antenna to the vertical position.
2-4
COM1
Figure 2-1. Ports on the Cradle
Figure 2-2. Power Supply Port
Power port