Symbol P 370 RF Reference Manual page 42

P 370/470 RF Scanner Product Reference Guide
3. Enable Autoload
9. Back To Main
2. Parameter Control
0. Scan Parameter
1. Set Default Param
9. Back To Main
3. System Status
0. Battery Check
9. Back To Main
4. Version
9. Return to App.
Each of these options is described in the following sections.
System Setup Options
This group of options perform basic system functions. Within this option are the Set RF
Channel, Set Contrast, Set Scanner ID, Set Host Type and Back To Main functions.
Set RF Channel
Allows users to set RF channel for communications between scanner and cradle.
Enter new channel number then press the <ENTER> key. A High-Lo-High-Lo tone is heard
if the change is successful. A Low-High beep is heard if the change failed. Make sure that you
have paired to a cradle and are within range before attempting to change a channel. Not all
channels are available in all countries. If the channel is not legal to use in your country, an
error beep will be heard instead of a successful warble. Contract the Symbol Support Center
if you don not know what the available channels are for your country.
3-10
Channel:
New Channel:
Figure 3-9. RF Channel Screen
54
_ _