Chapter 4 Maintenance and
Maintenance
Do not allow any abrasive material to touch the scanner window.
•
Remove any dirt particles with a damp cloth.
•
Wipe the scanner window using a damp cloth, and if necessary, a non-
•
ammonia based detergent.
Do not spray water or other cleaning liquids directly into the scanner
•
window.
If the contacts between the scanner and base become dirty, clean them
•
with either a pencil eraser or a cotton swab dampened with alcohol.
Change the battery pack when the batteries no longer provide 12 hours of
•
scanning in typical usage. This should occur after 2 years or more,
depending on your daily use.
Specifications
4-1