Parameter Menus
Intercharacter Delay
Select the intercharacter delay option matching host requirements. The intercharacter delay
gives the host system time to service its receiver and perform other tasks between characters.
The delay period can range from no delay to 99 ms in 1 ms increments (if you are using a
cradle and RTS/CTS handshaking, the delay period can range from 5 ms to 99 ms). After
scanning the bar code below, scan two bar codes beginning on page 5-102 to set the desired
time-out. If you make an error, or wish to change your selection, scan CANCEL on page
5-104.
IINTERCHARACTER DELAY
MCL-Net Parameters
MCL-Net Baud Rate
Baud rate is the number of bits of data transmitted per second. Scan the appropriate bar code
below to set the MCL-Net baud rate. The default baud rate is 38400.
BAUD RATE 600
5-95